DESIGN GUIDELINES
Design Guides
Model holes and pockets to these guides so your parts work the first time. Not sure? Send your file or a screenshot on LINE and we will check it.
HEAT-SET INSERT
Heat-Set Insert Design Guide
Recommended hole diameter, depth, wall thickness and edge distance for M1.6–M8 and 1/4"-20 brass inserts. PDF available.
Read the guide →MAGNET
Magnet Embedding Design Guide
Press-fit, glue-in and print-in pocket sizes for 4–18 mm neodymium disc magnets, plus polarity and cautions. PDF available.
Read the guide →SCREW & NUT
Screw & Nut Hole Design Guide
Clearance holes, holes for screwing into plastic, socket head counterbores, flat head countersinks and hex nut pockets for M1.6–M12. PDF available.
Read the guide →BALL BEARING
Bearing Housing Design Guide
Press-fit and slip-fit holes, shoulders and wall thickness for deep groove ball bearings (ZZ) with 7–70 mm bores, plus fit options and print orientation. PDF available.
Read the guide →TOLERANCE & FIT
Tolerance & Fit Clearance Design Guide
Recommended clearances for press, snug, sliding, rotating, loose and print-in-place fits, plus FDM and resin accuracy. PDF download available.
Read the guide →SNAP-FIT
Snap-Fit Design Guide
Maximum hook height by arm thickness and length, allowable strain for PLA, PETG, ABS and nylon, lead-in and return angles, print orientation. PDF download available.
Read the guide →WALL THICKNESS
Wall Thickness & Minimum Feature Size Guide
Minimum walls, ribs, pins, holes, embossed and engraved text, overhang angles and bridge spans for FDM and resin. PDF download available.
Read the guide →Not sure about your design? Send it to us
Share your file or a screenshot and we will check the holes and sizes, or upload your model for an instant quote.
Contact us on LINE